Search references for DRIVING WHEELS. Phrases containing DRIVING WHEELS
See searches and references containing DRIVING WHEELS!DRIVING WHEELS
Powered wheel of a locomotive
driving wheels are grouped into sets with wheels within each set linked together. Driving wheels are generally larger than leading or trailing wheels
Driving_wheel
1988 single by Jimmy Barnes
"Driving Wheels" is a song by Australian rock singer, Jimmy Barnes. It was released in January 1988 as the second single from Barnes' third studio album
Driving_Wheels
Steam locomotive by Robert Stephenson in 1829
of wooden wheels was driven by two external cylinders set at an angle of 38°. The smaller rear wheels were not coupled to the driving wheels, giving an
Stephenson's_Rocket
Railway locomotive powered by a steam engine
designates consecutive pairs of wheels (informally "axles") with a number for non-driving wheels and a capital letter for driving wheels (A=1, B=2, etc.) So a Whyte
Steam_locomotive
Fourth generation of BMW 5 Series
cylinder petrol producing 260 bhp and 330 nm of torque to the rear driving wheels. 0–60 miles per hour in 6.7 seconds and a top speed of 160 miles per
BMW_5_Series_(E39)
Indian steam locomotive class
562 mm) diameter driving wheels proposed by the Ministry of Railways, and one with 4 ft 8+1⁄2 in (1,435 mm) diameter driving wheels, commonplace with
Indian_locomotive_class_HG
Rod connecting driving wheels of a locomotive
A coupling rod or side rod connects the driving wheels of a locomotive. Steam locomotives in particular usually have them, but some diesel and electric
Coupling_rod
Glossary of the main components of a typical steam locomotive
Sand dome Holds sand that is directed on to the rail in front of the driving wheels to improve traction, especially in wet or icy conditions or when vegetation
Steam_locomotive_components
Class of 74 2-2-2 passenger locomotives
substituted plate frames, provided larger boilers and 7 ft 0 in (2.134 m) driving wheels. The first twenty were built by Sharp, Stewart and Company in 1851–1853
LNWR_Bloomer_Class
Any wheel of a motor vehicle that transmits force
vehicle that transforms torque into a tractive force. Russ, Carey. "Driving Wheels: Introduction and Rear-Wheel Drive". The Auto Channel. Retrieved 13
Drive_wheel
Articulated steam locomotive with three sets of driving wheels
locomotive class that divided the driving force on its wheels by using three pairs of cylinders to drive three sets of driving wheels. Any such locomotive will
Triplex_locomotive
Articulated locomotive wheel arrangement
is a locomotive with a four-wheel leading truck, two sets of eight driving wheels, and a four-wheel trailing truck. Only one model of locomotives has
4-8-8-4
Locomotive wheel arrangement
wheel arrangement of four leading wheels on two axles, two powered driving wheels on one axle, and two trailing wheels on one axle. Other equivalent classifications
4-2-2
steam locomotive Onward had polygonal driving wheels. This rather ineffective locomotive with only one driving axle was built in 1887 by the Hinkley Locomotive
Onward_(locomotive)
PRR T-1 class 4-4-4-4 locomotive under construction
the nonprofit constructing the locomotive, has so far completed all 8 driving wheels as well as the boiler, cab, keystone, frame and the cylinders. The Pennsylvania
Pennsylvania_Railroad_5550
Code for arrangement of locomotive wheels
form counts the number of leading wheels, then the number of driving wheels, and finally the number of trailing wheels, numbers being separated by dashes
Whyte_notation
Steam locomotive with three or more sets of drive wheels
steam locomotive that divides the driving force on its wheels by using multiple pairs of cylinders to drive multiple driving wheel set groups. Such a locomotive
Multiplex_locomotive
Unpowered locomotive wheel located rear of the driving wheels
unpowered wheel or axle (wheelset) located behind the driving wheels. The axle of the trailing wheels is usually located in a trailing truck. On some large
Trailing_wheel
Locomotive wheel arrangement
wheels, four powered but uncoupled driving wheels, and two trailing wheels; or of two independent leading axles (not in a bogie), two driving wheels,
2-2-2-2
Tank locomotive wheel arrangement
wheel arrangement of four leading wheels on two axles, two powered driving wheels on one axle, and four trailing wheels on two axles. The configuration
4-2-4T
Self-propelled railway vehicle
reciprocating pistons which are connected to the locomotive's main wheels, known as the "driving wheels". Both fuel and water supplies are carried with the locomotive
Locomotive
Group of components that deliver power to the driving wheels
the drivetrain is to couple the engine that produces the power to the driving wheels that use this mechanical power to rotate the axle. This connection involves
Drivetrain
Experimental American 6-4-4-6 duplex locomotive
arrangement, meaning that it had two pairs of cylinders, each driving two pairs of driving wheels. To achieve stability at fast passenger train speeds (above
Pennsylvania Railroad class S1
Pennsylvania_Railroad_class_S1
Locomotive wheel arrangement
arrangement of four leading wheels on two axles, eight powered and coupled driving wheels on four axles and four trailing wheels on two axles. The type was
4-8-4
Balance of reciprocating and rotating engine components
All the driving wheels have an out-of-balance which is caused by their off-centre crank pins and attached components. The main driving wheels have the
Engine_balance
Tank locomotive wheel arrangement
a steam locomotive that has two leading wheels followed by two coupled driving wheels and four trailing wheels. This was an unusual wheel arrangement,
2-2-4T
Pulling or pushing capability of a locomotive
factors: input torque to the driving wheels, the wheel diameter, coefficient of friction (μ) between the driving wheels and supporting surface, and the
Tractive_effort
Class of eight British 4-4-0 locomotives
the 115 class in the 1920s. They had 6-foot-0-inch (1.829 m) diameter driving wheels with 18-by-24-inch (457 mm × 610 mm) cylinders. The first six of 1896
Furness_Railway_K2_Class
Replica steam locomotive under construction for the LMS Patriot Project society
45699 Galatea. The two classes share the same size 6'9" driving wheels. The six new driving wheels have been cast by The Boro Foundry Stourbridge and machined
LMS Patriot Class 5551 The Unknown Warrior
LMS_Patriot_Class_5551_The_Unknown_Warrior
Locomotive wheel arrangement
arrangement of four leading wheels on two axles, six powered and coupled driving wheels on three axles and two trailing wheels on one axle. The 4-6-2 locomotive
4-6-2
Locomotive wheel arrangement
wheel arrangement of four leading wheels on two axles, two powered driving wheels on one axle and no trailing wheels. This type of locomotive is often
4-2-0
Experimental steam locomotive
two sets of driving wheels (six and four) in a rigid locomotive frame, and a four-wheel trailing truck. The first group of six driving wheels were powered
Pennsylvania Railroad class Q1
Pennsylvania_Railroad_class_Q1
British steam locomotive
Stirling, they are characterised by a single pair of large (8 ft 1 in) driving wheels which led to the nickname "eight-footer". Originally the locomotive
GNR_Stirling_4-2-2
Wheel designed for railway tracks
bogie (CwthE) or truck (NAmE). The powered wheels under the locomotive are called driving wheels. Wheels are initially cast or forged and then heat-treated
Train_wheel
Type of American steam locomotive
four-wheel leading truck for stability entering curves, two sets of eight driving wheels and a four-wheel trailing truck to support the large firebox. Eight
Union_Pacific_Big_Boy
Preserved Union Pacific steam locomotive
4 m2), lengthening the boiler, adding four driving wheels, and reducing the diameter of the driving wheels from 69 to 68 in (1,753 to 1,727 mm). Originally
Union_Pacific_4014
Type of tank locomotive
characteristics: An 0-4-4RT wheel arrangement, that is four driving wheels followed by a truck with four wheels (though the term has become somewhat generic; many
Forney_locomotive
Steam powered road roller
the main roll replaces the front wheels and axle that would be fitted to a traction engine, and the driving wheels are smooth-tired. The word steamroller
Steamroller
2-2-2 built 1839 Driving wheels 5'0" diameter, Cylinders 11x16 (outside) (renamed Bee in 1841) 2. Hercules 2-2-2 built 1840 Driving wheels 5'6" diameter
Midland Counties Railway Locomotives
Midland_Counties_Railway_Locomotives
Locomotive wheel arrangement
four leading wheels on two axles (usually in a leading bogie), four powered and coupled driving wheels on two axles, and no trailing wheels. First built
4-4-0
Locomotive part
large diameter motors were larger than most driving wheels and so were mounted well above the level of the driving axles. The motor or motors drove the jackshaft
Jackshaft_(locomotive)
Locomotive wheel arrangement
wheel arrangement of no leading wheels, six powered and coupled driving wheels on three axles, and no trailing wheels. Historically, this was the most
0-6-0
Locomotive wheel arrangement
the wheel arrangement of four leading wheels, six powered and coupled driving wheels and four trailing wheels. In France where the type was first used
4-6-4
Defunct locomotive manufacturer
had conventional 63" driving wheels. In 1927, the Erie Railroad took delivery of a "second-phase" Berkshire with 70" driving wheels, capable not only of
Lima_Locomotive_Works
Locomotive wheel arrangement
locomotives, a 2-8-8-8-8-2 has two leading wheels, four sets of eight driving wheels, and two trailing wheels. Because of its length, such a locomotive
2-8-8-8-8-2
Railroad jargon
on the driving wheels. This force, called overbalance, is caused by a design compromise: in order to improve the ride, a locomotive's wheels are unbalanced
Hammer_blow
English prototype steam locomotives
cylinders, outside Stephenson valve gear and driving wheels, but the round-top boiler and carrying wheels were new. The wheelbase was 18 ft 0 in (5.49 m)
GWR Dean experimental locomotives
GWR_Dean_experimental_locomotives
Steam locomotive which carries its fuel and water onboard
producing arrangements with only driving wheels (e.g. 0-4-0T and 0-6-0T) or equal numbers of leading and trailing wheels (e.g. 2-4-2T and 4-6-4T). However
Tank_locomotive
Locomotive wheel arrangement
wheel arrangement of two leading wheels on one axle, two powered driving wheels on one axle, and two trailing wheels on one axle. The wheel arrangement
2-2-2
brass piston rings. The driving wheels were typically cast iron, and axles were usually 6-inch-diameter wrought iron. Driving wheels were fitted with replaceable
Mount_Savage_Locomotive_Works
pairs of driving wheels, either to better distribute weight and reduce "hammer blow" damage to the track or to add space between driving wheels for a larger
Divided_drive_(locomotive)
Railway locomotive wheel arrangement
a four-wheeled leading bogie, four powered and coupled driving wheels, and two trailing wheels supporting part of the weight of the boiler and firebox
4-4-2_(locomotive)
Weight on the driving wheels of a train
Adhesive weight is the weight on the driving wheels of a locomotive, which determines the frictional grip between wheels and rail, and hence the drawbar pull
Adhesive_weight
Early steam locomotive (built 1825)
to make use of coupling rods to link together its driving wheels, reducing the chance of the wheels slipping on the iron rails. However, the centre-flue
Locomotion_No._1
Class of 52 4-4-4-4 duplex locomotives
Baldwin's latest idea: the duplex locomotive. This split the locomotive's driving wheels into two sets, each with its own pair of cylinders and rods. Until then
Pennsylvania Railroad class T1
Pennsylvania_Railroad_class_T1
Topics referred to by the same term
engine Single (locomotive), a steam locomotive with a single pair of driving wheels As a verb: to convert a double-track railway to a single-track railway
Single
Type of steam locomotive, built from 1846
large driving wheels. The crux of the Crampton patent was that the single driving axle was placed behind the firebox, so that the driving wheels could
Crampton_locomotive
Articulated steam locomotive
central frame; they consist of a steam engine unit – with driving wheels, trailing wheels, valve gear, and cylinders, and above it, fuel and/or water
Garratt_locomotive
Steam locomotive wheel arrangement
arrangement, a 4-6-6 is a locomotive with a four-wheeled leading truck, six driving wheels, and a six-wheeled trailing truck. All the locomotives produced of this
4-6-6
Locomotive wheel arrangement
two leading wheels on one axle, usually in a leading truck, eight powered and coupled driving wheels on four axles and two trailing wheels on one axle
2-8-2
Articulated locomotive wheel arrangement
arrangements, has two leading wheels, a set of six driving wheels, a set of eight driving wheels, and no trailing wheels. These locomotives usually employ
2-6-8-0
Electric locomotive transmission system
mounted locomotive frame. The weight of the driving motors is completely disconnected from the driving wheels, which are exposed to movement of the rails
Buchli_drive
Locomotive wheel arrangement
represents the wheel arrangement of two leading wheels, ten powered and coupled driving wheels, and four trailing wheels. Typically using a Bissel truck in front
2-10-4
Early type of electric locomotive
wheel arrangement of three coupled driving wheels, with a leading and trailing articulated pony truck. The driving wheels are coupled by external coupling
Rigid-framed electric locomotive
Rigid-framed_electric_locomotive
Locomotive wheel arrangement
is a locomotive with no leading wheels, eight driving wheels (4 axles) fixed in a rigid frame, and six trailing wheels (normally mounted in a trailing
0-8-6T
Locomotive wheel arrangement
the locomotive's weight was on the unpowered leading wheels rather than the powered driving wheels, therefore giving poor adhesion, and the long wheelbase
6-2-0
Articulated locomotive wheel arrangement
articulated locomotive type with two leading wheels, two sets of six driving wheels and six trailing wheels. Only two classes of the 2-6-6-6 type were built
2-6-6-6
Locomotive wheel arrangement
wheel arrangement of no leading wheels, twelve powered and coupled driving wheels on six axles, and no trailing wheels. Other equivalent classifications
0-12-0
Articulated locomotive with compound steam power
fed steam at boiler pressure to high-pressure cylinders driving the rear set of driving wheels (rigidly connected to the boiler). The exhaust steam from
Mallet_locomotive
Locomotive wheel arrangement
two leading wheels on one axle, usually in a leading truck, eight powered and coupled driving wheels on four axles, and no trailing wheels. In the United
2-8-0
Locomotive wheel arrangement
arrangement of two leading wheels on one axle, four powered but uncoupled driving wheels on two axles, and no trailing wheels, but can also be used to represent
2-2-2-0
Single-axle bogie which pivots towards the centre of a steam locomotive
locomotives because their position on the track is dictated by the driving or coupled wheels. The Bissel truck also helps stabilize a train in a turn, where
Bissel_truck
Preserved British steam locomotive
large-diameter driving wheels of around 8 ft (2.4 m). The wheel diameter is effectively the "gear ratio" of a steam engine, and large driving wheels delivered
LNWR_2-2-2_3020_Cornwall
Class of 16 four-cylinder 4-6-0 locomotives
new locomotives. No. E859 was fitted with smaller 6 ft 3 in (1.905 m) driving wheels to see if this would improve performance over the heavily graded London-Dover
SR_Lord_Nelson_class
Locomotive wheel arrangement
arrangement of two leading wheels on one axle, ten powered and coupled driving wheels on five axles, and no trailing wheels. This arrangement was often
2-10-0
Locomotive wheel arrangement
represents the wheel arrangement of two leading wheels, six coupled driving wheels and two trailing wheels. This arrangement is commonly called a Prairie
2-6-2
Duplex locomotive wheel arrangement
has four leading wheels followed by four coupled driving wheels, a second set of six coupled driving wheels and four trailing wheels. The Pennsylvania
4-4-6-4
Class of British express passenger locomotive
6 ft 8 in (2.032 m) driving wheels and a 'heavy passenger and freight' type (designated A2) with 6 ft 2 in (1.880 m) driving wheels. He was not able to
LNER_Thompson_Class_A2/3
Articulated locomotive wheel arrangement
pair of unpowered leading wheels, followed by two sets of three pairs of powered driving wheels and one pair of trailing wheels. The wheel arrangement was
2-6-6-2
Locomotive wheel arrangement
locomotive with four leading wheels, one set of four driving wheels, one set of six driving wheels, and a two trailing wheels. Other equivalent classifications
4-4-6-2
Class of 49 Japanese 4-6-4 locomotives
National Railways (JNR). The "C" classification indicates three sets of driving wheels. The C62 was rebuilt with the boilers of older Class D52 2-8-2 locomotives
JNR_Class_C62
Unpowered wheel at the front of a locomotive
located in front of the driving wheels. The axle or axles of the leading wheels are normally located on a leading truck. Leading wheels are used to help the
Leading_wheel
Engerth locomotive wheel arrangement
arrangement, is a locomotive with no leading wheels, four driving wheels fixed in a rigid frame, and six trailing wheels (normally mounted in a trailing truck)
0-4-6T
American steam turbine locomotive
truck keeping the locomotive stable at speed, eight powered and coupled driving wheels, and a six-wheel trailing truck supporting the large firebox. The S2
Pennsylvania Railroad class S2
Pennsylvania_Railroad_class_S2
Type of railroad steam engine
followed, progressively enlarged. The uncoupled driving wheels were problematic as the two pairs of wheels could be rotating in opposite directions on starting
Compound_locomotive
Articulated locomotive wheel arrangement
locomotive that has four leading wheels followed by two sets of six coupled driving wheels and four trailing wheels. 4-6-6-4s are commonly known as Challengers
4-6-6-4
Locomotive wheel arrangement
units, each unit with no leading wheels, six powered and coupled driving wheels on three axles and no trailing wheels. The arrangement is effectively two
0-6-0+0-6-0
Locomotive wheel arrangement
that has two unpowered leading wheels, followed by eight coupled and powered driving wheels, and four trailing wheels. This locomotive type is most often
2-8-4
Vehicle containing a pivotal joint
trams and trains. Steam locomotives were sometimes articulated so the driving wheels could pivot around corners. In a broader sense, any vehicle towing a
Articulated_vehicle
Locomotive wheel arrangement
wheel arrangement of no leading wheels, eight powered and coupled driving wheels on four axles and no trailing wheels. Locomotives of this type are also
0-8-0
Locomotive wheel arrangement
represents the wheel arrangement of no leading wheels, two powered driving wheels on one axle, and four trailing wheels on two axles. This is an unusual wheel
0-2-4
Railway relying on adhesion to move trains
improve traction when driving wheels start to slip. Adhesion is caused by friction, with maximum tangential force produced by a driving wheel before slipping
Adhesion_railway
Duplex locomotive wheel arrangement
arrangement of two leading wheels on one axle, two driving wheels powered from the inside cylinders, four coupled driving wheels powered from the outside
2-2-4-0T
Locomotive wheel arrangement
locomotives, a 2-6-4 locomotive has two leading wheels, six coupled driving wheels and four trailing wheels. With only a few known exceptions, the Adriatic
2-6-4
Former class of English locomotives
need for a tender. The coupled wheelbase between the rear and centre driving wheels was reduced from that used on the mechanically identical N class to
SECR_K_and_SR_K1_classes
Locomotive wheel arrangement
arrangement, is one that has no leading wheels, followed by two coupled driving wheels, with two trailing wheels. The configuration was briefly built by
0-2-2
Locomotive wheel arrangement
wheel arrangement of no leading wheels, ten powered and coupled driving wheels on five axles, and two trailing wheels on one axle (usually in a trailing
0-10-2
Class of British steam locomotives
number 2 boiler running at 200 psi (1.38 MPa), flat topped tanks and driving wheels of 5 feet 8 inches (1.727 m) in diameter, it was the forerunner of 289
GWR_5100_Class
Preserved American 2-10-4 steam locomotive
600s had was their poorly counterbalanced driving wheels; at 45 miles per hour (72 km/h), the driving wheels would lift off the rails, so the locomotives
Texas_and_Pacific_610
Systems vehicles with multiple power sources use to transmit power to the wheels
Hybrid vehicle drivetrains transmit power to the driving wheels for hybrid vehicles. A hybrid vehicle has multiple forms of motive power, and can come
Hybrid_vehicle_drivetrain
travel, tourism, insurance
DRIVING WHEELS
DRIVING WHEELS
DRIVING WHEELS
DRIVING WHEELS
DRIVING WHEELS
DRIVING WHEELS
DRIVING WHEELS
DRIVING WHEELS
DRIVING WHEELS
travel, tourism, insurance