Search references for BORE AXIS. Phrases containing BORE AXIS
See searches and references containing BORE AXIS!BORE AXIS
Longitudinal axis through the center of a gun barrel
The bore axis of a firearm is the longitudinal axis through the geometric center of the gun barrel. In a rifled barrel, the projectile (bullet/ball, pellet
Bore_axis
Revolver
their most distinctive feature is that the barrel is on a much lower bore axis, as the Rhino fires from the lowermost chamber of the cylinder rather
Chiappa_Rhino
Grooves in a weapon barrel for accuracy
third method simply reports the angle of the grooves relative to the bore axis, measured in degrees. The latter two methods have the inherent advantage
Rifling
Distance at which a firearm or projectile can be fired directly at its target and hit
and its preceding prototypes had iron sight lines elevated over the bore axis to extend point-blank range. The current trend for elevated sights and
Point-blank_range
Method for aligning firearm sights
Boresighting is a method of visually pre-aligning a firearm barrel's bore axis with the target, in order to more easily zero the gunsight (optical or
Boresight_(firearm)
Aiming device
composed of two components mounted perpendicularly above the weapon's bore axis: a 'rear sight' nearer (or 'proximal') to the shooter's eye, and a 'front
Iron_sights
1974 Soviet 5.45×39mm assault rifle
contains a gas channel that is installed at a 90° angle in relation to the bore axis to reduce bullet shear at the port hole. A pair of support brackets are
AK-74
German assault rifle
position of the shoulder stock nearly in line with the longitudinal axis of the barrel bore, a feature increasing controllability by reducing muzzle rise during
StG_45(M)
Soviet 7.62×39mm assault rifle
contains a gas channel that is installed at a slanted angle with the bore axis. The muzzle is threaded for the installation of various muzzle devices
AK-47
Type of firearm action
barrel(s) are hinged much like a door and rotate perpendicularly to the bore axis to expose the breech and allow loading and unloading of cartridges. A
Break_action
Type of internal combustion engine
is one in which each cylinder is positioned with its exact center (the bore axis) slightly offset from the center line of the crankshaft. "Désaxé", in
Desaxe
Light machine gun
barrel, which has a new gas block with a gas channel at a 90° angle to the bore axis, and a ring for the cleaning rod. The RPK-74 is also equipped with a folding
RPK-74
Semi-automatic pistol
accuracy. The Strike One pistol features a low bore axis as the distance from the barrel central axis to the top of the grip is 12 mm (0.47 in). Other
Arsenal_Firearms_Strike_One
Carbine
integrated into the gas block/forward sling loop. The sight height above the bore axis is also approximately 3 mm (0.1 in) higher than the AK-74, due to the
AKS-74U
the bore to the other side. The rocking will first align the gauge with the bore axis and the act of moving the handle to the other side of the bore will
Bore_gauge
Phenomenon in firearm dynamics
The primary reason for muzzle rise is that for nearly all guns, the bore axis (longitudinal centerline of the barrel) is above the gun's center of mass
Muzzle_rise
Russian shotgun
with picatinny rail makes mounting optics simpler, and is closer to the bore axis, making sighting of optics easier. The gas-block rail system allows for
Saiga-12
Automatic revolver
aligned with the bottom of the cylinder instead of the top. This lowers the bore axis (line of the barrel) which directs the recoil in line with the shooter's
Mateba_Autorevolver
Semi-automatic pistol
gas-delayed mechanism and a fixed barrel which enables good precision, a low bore axis for less barrel lift and an internal slide which means that the sights
Laugo_Alien
Russian submachine gun
pistol grip and magazine are folded under the barrel in line with the bore axis and covered by the folded stock body. The folded weapon resembles a cuboid
PP-90
Pre-assembled firearm ammunition
aligned with the bore axis (i.e. "in battery"). While in the chamber, the cartridge case obturates all other directions except the bore to the front, reinforced
Cartridge_(firearms)
Pointed, fin-stabilized steel projectile
alignment with the bore axis, and supported by a metal disk to prevent penetration of the over-powder wad during acceleration down the bore. The tips of the
Flechette
Italian sport firearms manufacturer
Their pistols are known for their characteristic swept-back grips and low bore axis. Several of the firm's products are competitive at the international level
Pardini_Arms
WW2-era German assault rifle
"straight-line" recoil configuration and an elevated sight line over the bore axis. The inline design helps reduce muzzle rise during automatic fire. Details
StG_44
Anti-tank gun
(23 ft 4 in) Self-propelled: 6.79 m (22 ft 3 in) Barrel length Bore: 51 calibres Bore axis: 0.925 m (3 ft 0.4 in) Width 2.66 m (8 ft 9 in) Height Transport:
Sprut_anti-tank_gun
Polymer frame semi-automatic handgun
undercut trigger guard section. Per SIG Sauer, the P365 has the lowest bore-axis ratio of any handgun currently made. The P365 is offered with Tritium
SIG_Sauer_P365
Soviet assault rifle
The sight line elements are approximately 48.5 mm (1.9 in) over the bore axis. The "point-blank range" battle zero setting "П" on the 7.62×39mm AKM
AKM
Semi-automatic pistol
over pistols with pivoting barrels (like the U.S. M1911 series). The low bore axis of the vz. 82 provides for less muzzle rise and quicker follow-up shots
CZ_82
Light machine gun
range of rotation to either side. With the bipod fully extended, the bore axis is elevated to a height of 465 mm (18.3 in). The Minimi can also be fired
FN_Minimi
Battle and designated marksman rifle
version. The design of the receiver, barrel interface, gas port and the bore axis alignment of the rifle have been further optimised to increase its accuracy
Heckler_&_Koch_HK417
Semi-automatic pistol
with the frame via the replaceable cross-pin. The design allows a low bore axis relative to the shooter's hand and avoids the use of the transfer/locking
Grand_Power_K100
General purpose machine gun
angular, interposed transmission system, installed symmetrically to the bore axis, with two cylindrical rollers acting as transmission elements against
MG_45
Semi-automatic pistol
Although the precision is on par with any top-notch target pistols, the high bore axis will increase felt recoil, and doesn't lend itself to ISSF rapid-fire
Erma_ESP_85A
German general-purpose machine gun
during firing, the rollers rest on parallel surfaces relative to the bore axis on the bolt head ensuring a full lockup. Upon firing, rearward force from
MG_42
Difference in apparent position with viewing angle
perpendicular distance between the sight and the weapon's launch axis (e.g. the bore axis of a gun)—generally referred to as "sight height"—can induce significant
Parallax
Semi-automatic pistol
designed to give the gun "a high grip purchase—what most people call a low bore axis—that's really close to the slide. Your barrel is right above your grip
Hudson_H9
Semi-automatic pistol
indicator. The operating spring surrounds the barrel, allowing for a lower bore axis than pistols such as John Browning's M1911 that have the operating spring
Heckler_&_Koch_P9
Reciprocating internal combustion engine
surface and an angle milled block deck (10 degrees off square with the bore axis), with the piston top determining the compression ratio and combustion
Ford_MEL_engine
UK large hunting rifle cartridge
rate of 1:15. The barrel is to have a groove Ø of 13.00 mm (0.512 in) and a bore Ø of 12.70 mm (0.500 in) with a groove width of 3.61 mm (0.142 in). Maximum
.500_Nitro_Express
Part of a firearm
under spring pressure, slides along the bore axis rather than pivoting around a pin placed perpendicular to the bore, as with the more common rotating hammer
Hammer_(firearms)
Sniper rifle
muzzle brake and bipod (that lets the rifle swivel or "hang" near its bore axis offering a more stable shooting position with large and heavy aiming optics
Sako_TRG
Soviet light support weapon and variants
barrel, which has a new gas block with a gas channel at a 90° angle to the bore axis, and a ring for the cleaning rod. It is also equipped with a folding bipod
RPK
Semi-automatic pistol
slide was flattened, sides were slanted (similarly to those of H&K USP), bore axis was lowered by 4 mm, trigger mechanism as well as slide release and decocking
Zastava_PPZ
Semi-automatic pistol
against when the recoil spring returned the bolt to battery. The low bore axis served to greatly reduce muzzle jump, and served to allow the fitting
Smith_&_Wesson_Model_422
Italian inventor and firearms designer
lower chamber of the cylinder instead of the top in order to lower the bore axis and minimize the muzzle rise due to recoil. In the 1970s he designed his
Emilio_Ghisoni
Musical instrument
mouth'), or blowing edge, of a hotchiku is closer to perpendicular to the bore axis than that of a modern shakuhachi, but this is mostly a choice of the maker
Hotchiku
Semi-automatic pistol
eventually contracted to produce the Colt weapon. Because of a lower bore axis, lighter slide, and locked breech, the Remington 53 boasted much less
Remington_Model_51
Bolt-action rifle
assembly gives the assembly a small amount of free movement lateral to the bore axis. This motion assures that the locking lugs fully contact the receiver
Savage_Model_110
Submachine gun
when combined with the off-axis bolt travel, though it also greatly raises the sight line in comparison to the bore axis. The initial prototype model
KRISS_Vector
Tool used in metalworking and woodworking
be moved only in an up-and-down motion (on the Z axis) to create a perfect circular hole. Modern boring tools have three primary components although many
Boring_bar
Belgian compact personal defense weapon
of ammunition which lie in two rows facing left, offset 90° from the bore axis. As the cartridges are pushed back by spring pressure and arrive at the
FN_P90
Military use of combat shotgun cartridges
alignment with the bore axis, and supported by a metal disk to prevent penetration of the over-powder wad during acceleration down the bore. Cartridges manufactured
Military_12-gauge_cartridges
System of operation used to provide energy to operate autoloading firearms
principal advantage is that the moving parts are placed in-line with the bore axis meaning that sight picture is not disturbed as much. This offers a particular
Gas-operated_reloading
Mechanical arrangement
utilizing a ball bearing in a bore with spring pressure. The cartridge is installed perpendicular to the barrel bore axis, just ahead of where the ball
Ball_detent
Serbian designated marksman rifle
to a Warsaw Pact rail and is positioned centred over the receiver and bore axis. This optical sight is similar to the PSO-1 4×24 sight used on the Russian
Zastava_M76
Type of bullet that expands on impact with a solid object
void so the center of mass of the entire bullet remains within the full diameter portion of the bullet, to minimize misalignment with the bore axis.
Soft-point_bullet
Structural component of a long gun
stock, rotated around an axis parallel to the bore line, referenced to zero degrees if pointing vertical to the ground. Bore line, A datum line concentric
Stock_(firearms)
General-purpose machine gun
features an elevation adjustment mechanism that enables the weapon's bore axis to be maintained from 300 mm (11.8 in) to 600 mm (23.6 in), has a 30°
FN_MAG
Semi-automatic pistol
"hump" which meets the web of the hand at the rear. It also has a high bore axis which increases felt recoil. The CZ 52's operating controls consist of
CZ_52
Finnish anti-tank gun
(220 in) L/56 Barrel length 5,350 mm (211 in) L/54 Rifled bore length 4,630 mm (182 in) Bore axis height 800 mm (31 in) (combat, 0° elevation) Breech semi-automatic
Tampella_100_PSTK
General-purpose machine gun (HK21)
angular, interposed transmission system, installed symmetrically to the bore axis, with two cylindrical rollers acting as transmission elements against
Heckler_&_Koch_HK21
Process of enlarging an already-drilled hole with a single-point cutting tool
vertical axis while boring bar/head moves linearly; essentially a vertical lathe) and horizontal boring mills (workpiece sits on a table while the boring bar
Boring_(manufacturing)
Walther semi-automatic handgun
universally. However, its blocky appearance and tall slide, resulting in a high bore axis, generated criticism. Walther attempted to address some complaints about
Walther_PPX
Semi-automatic pistol
adjustable single-action push mechanism, relatively high weight and with a low bore axis. It is chambered for the 9×19mm Parabellum cartridge, or alternately the
Pardini_GT9
Finnish submachine gun
of this design is the angle of the bolt guide rails in relation to the bore axis. When fired, the telescopic bolt, which encloses the barrel for most of
Jatimatic
Type of firearm action
rearward movement of the bolt in relation to the bore-axis required a greater movement along the axis of bolt movement, essentially magnifying the resistance
Blowback_(firearms)
Firearm locking method
during firing, the rollers rest on parallel surfaces relative to the bore axis on the bolt head, so no amount of force pushing back on the bolt can cause
Roller_locked
Aircraft engine family
heads with parallel pattern heads (valve stems parallel to the cylinder bore axis) scaled up from the Kestrel engine. 400-hour flight endurance tests carried
Rolls-Royce_Merlin
Semi-automatic pistol
to be thinner; it also permitted the slide to be more squat with a low bore axis, resulting is less muzzle rise and flip. The PM barrel configuration boasts
Kahr_P_series
Main battle tank family of German origin
and main gun drives to align the plotted aiming mark with the main gun bore axis, without disturbing the line of sight. Once these were coincident, the
Leopard_1
Rifle cartridge
the case wall, helps the cartridge to line up concentrically with the bore axis, contributing to accuracy. Although it is possible to use 600-grain (39 g)
.470_Capstick
each bullet is fired, it will leave the barrel of the weapon at the axis of bore set from the angle of sight desired to strike the target area.[jargon]
Grazing_fire
Type of handgun where the firing chamber is integral to the barrel
of the cartridge being fired, are bored through the cylinder so that their axes are parallel to the cylinder's axis of rotation; thus, as the cylinder
Pistol
Ammunition feeding device of a firearm
tooth bar of the sprocket, which is mounted on a spindle parallel to the bore axis and rotates each round sequentially into the feeding position. Rotary
Magazine_(firearms)
follows: the price of boring rises linearly with depth bore axis with neutral floating the possibility to make vertical or inclined bores up to 10 km deep
New_drilling_technologies
Semi-automatic pistol
and longer lock time provide less felt and actual recoil. The R51's low bore axis gives less muzzle rise which also lowers perceived recoil, while the stationary
Remington_R51
WWII-era oil tanker
Acting diesel engine which had eight cylinders of 28.75 inches (73.0 cm) bore by 63 inches (160 cm) stroke. The engine was built by Gebroeders Stork &Co
Lothringen_(oil_tanker)
Type of musical instrument
mouth"), or blowing edge, of a hotchiku is closer to perpendicular to the bore axis than that of a modern shakuhachi. Quena To produce sound, the player closes
Bamboo_flute
American rifle cartridge
10 in (250 mm). The barrel is to have a groove width of .115 in (2.9 mm). Bore is given as .300 in (7.6 mm) and a groove is .308 in (7.8 mm). Maximum case
.300_Remington_Ultra_Magnum
Pendulum used in measuring a bullet's momentum
distance from pivot to the ribbon f {\displaystyle f} is the distance from bore axis to pivot point M {\displaystyle M} is the combined mass of gun and pendulum
Ballistic_pendulum
President of Chile from 2022 to 2026
Gabriel Boric Font (Spanish: [ɡaˈβɾjel ˈβoɾitʃ ˈfont];; born 11 February 1986) is a Chilean politician who served as President of Chile from 2022 to 2026
Gabriel_Boric
Initial period of low activity in World War II
evacuation commencing sixteen days later on 26 May, the Phoney War ended. "Bore War" was the initial term used by the British. It was likely a pun on the
Phoney_War
Semi-automatic pistol
to be thinner, it also permitted the slide to be squatter with a low bore axis, resulting is less muzzle rise and flip. The PM barrel configuration boasts
Kahr_PM_series
Angular measurement, thousandth of a radian
The concept of a tilted scope mount can be explained as the angle between the bore-axis of a rifle and its scope.
Milliradian
Reciprocating internal combustion engine
with the VK series update. Specifications (for 1bbl carbureted variant): Bore × Stroke Size: 3.76 in × 3.68 in (96 mm × 93 mm) Compression ratio: 9.5:1
Chrysler_Hemi-6_Engine
Indian banker
and chief executive officer (CEO) of Axis Bank, the third largest private sector bank in India. He joined Axis in January 2019, after heading HDFC Life
Amitabh_Chaudhry
First period of the Neoproterozoic Era
year old shale in the Mbuji-Mayi Supergroup with mycelia-like filaments. Boring Billion – Earth history, 1.8 to 0.8 billion years ago Neoproterozoic oxygenation
Tonian
Computer-controlled cutting machine
typically available in 3-axis and 5-axis CNC formats. Many manufacturers offer A and B axis for full 5-axis capabilities and rotary 4th axis. Common industrial
CNC_router
Genus of carcharodontosaurid dinosaurs
relatives, it had a large, lightly-built skull, but was distinct in that it bore a distinctive horn-like protuberance on its snout. Its vertebrae were sturdy
Tameryraptor
Emperor of Japan from 1926 to 1989
culminating in the entry of the Empire of Japan into World War II as an Axis power. The atomic bombing of Hiroshima and Nagasaki led Hirohito to announce
Hirohito
Ongoing oil shortage and economic crisis
response to the humanitarian crisis. Chile: Then-current president Gabriel Boric called the blockade "criminal" and "inhumane", saying that "nothing justifies
2026_Cuban_crisis
Flow-control device
with a hole (also known as a bore) through the middle. When the valve handle is turned, the ball rotates to align the bore with the flow path—allowing
Ball_valve
Battle in the Western Desert Campaign of the Second World War
First Battle of El Alamein and the Battle of Alam el Halfa had prevented the Axis from advancing further into Egypt. In October 1942 Lieutenant-General Bernard
Second_Battle_of_El_Alamein
break-action A firearm whose barrels are hinged, and rotate perpendicular to the bore axis to expose the breech and allow the loading and/or unloading of ammunition
Glossary_of_firearms_terms
Machine Hsiao, Yun; Oberprieler, Rolf G. (2020). "A review of the trunk-boring cycad weevils in Australia, with description of a second species of Demyrsus
List of organisms named after works of fiction
List_of_organisms_named_after_works_of_fiction
Country in South America
mammal called Neosclerocalyptus were unearthed near Buenos Aires. These bones bore cut marks indicative of butchering with stone tools, implying human activity
Argentina
Traditional musical instrument
It produces a very "textured" and "dark" timbre because of the length-to-bore ratio of about 16 to 20 (subsequently causing difficulty in the upper register)
Quena
Major World War II battle from 1942 to 1943
battle on the Eastern Front of World War II in which Nazi Germany and its Axis allies fought the Soviet Union for control of the city of Stalingrad in southern
Battle_of_Stalingrad
Atmospheric effect caused by the solar wind
seasons. Two factors to consider are the tilt of both the solar and Earth's axis to the ecliptic plane. As Earth orbits throughout the year, it experiences
Aurora
First spine bone, supports skull
the neck. The bone is named after Atlas of Greek mythology, just as Atlas bore the weight of the heavens, the first cervical vertebra supports the head
Atlas_(anatomy)
BORE AXIS
BORE AXIS
Surname or Lastname
English
English : habitational name from any of various places, for example in Kent and Wiltshire, named Gore, from Old English gÄra ‘triangular piece of land’ (a derivative of gÄr ‘spear’, with reference to the triangular shape of a spearhead).French : nickname for a gluttonous and idle individual, from Old French gore ‘sow’ (of allegedly imitative origin, reflecting the grunting of the animal).
Male
Scandinavian
 Variant spelling of Scandinavian Tor, TORE means "Thor" or "thunder." Compare with another form of Tore.
Boy/Male
Australian, Norse
Father of Bor
Surname or Lastname
English
English : variant spelling of Bourne.North German, Danish, and Dutch : from Middle Low German born ‘well’, ‘spring’, a topographic name for someone who lived beside a well or spring, or a habitational name from a place named with this word.
Female
Greek
(ΚόÏη) Greek name KORE means "maiden." In mythology, this is a title belonging to Persephone, a goddess of the underworld.
Surname or Lastname
English
English : habitational name from either of two places, one in South Yorkshire (formerly in Derbyshire) and the other near Hereford. The former gets its name from Old English dor ‘door’, used of a pass between hills; the latter from a Celtic river name of the same origin as Dover 1. In some cases, the name may be topographic, from Middle English dore ‘gate’.Irish : in County Limerick a reduced Anglicized form of Gaelic Ó Doghair ‘descendant of Doghar’, a byname meaning ‘sadness’; alternatively, according to MacLysaght, it could be from De Hóir, a name of Norman origin. Outside Limerick it may be from French Doré (see below).French (Doré) : nickname from Old French doré ‘golden’, past participle of dorer ‘to gild’ (Late Latin deaurare, from aurum ‘gold’), denoting either a goldsmith or someone with bright golden hair.Hungarian (Dőre) : nickname from dőre ‘stupid’, ‘useless’ ‘mad’.
Surname or Lastname
Norwegian
Norwegian : habitational name from a farmstead named from Old Norse nór ‘narrows’ (see Nohr 1), or, in Nordfjord, a compound of nór + á ‘small river’.English : probably a habitational name from Nore in Surrey.
Male
Turkish
Turkish name BORA means "hurricane."
Female
German
 Variant spelling of German Lora, LORE means "laurel." Compare with another form of Lore.
Surname or Lastname
English
English : occupational name for one whose job was to bore holes in something, Middle English borer.Swiss German : variant of Bohrer.
Male
English
Short form of English Isidore, DORE means "gift of Isis."
Surname or Lastname
English
English : habitational name from Blore in Staffordshire, possibly named from Old English blÅr ‘swelling’, ‘hill’.
Male
Italian
 Italian short form of Latin Salvatore, TORE means "savior." Compare with another form of Tore.
Surname or Lastname
English
English : variant spelling of Boor.Possibly a shortened form of Dutch van den Boore, a variant of van den Borne (see Borne).
Female
Spanish
Portuguese and Spanish form of Hebrew Debowrah, DÉBORA means "bee."
Surname or Lastname
English
English : unexplained.
Boy/Male
Australian, Finnish, Swedish
Fight; Battle
Surname or Lastname
English and Irish
English and Irish : unexplained.
Surname or Lastname
English, North German, Dutch, Frisian, and Danish
English, North German, Dutch, Frisian, and Danish : from a Germanic personal name, Boio or Bogo, of uncertain origin. It may represent a variant of Bothe, with the regular Low German loss of the dental between vowels, but a cognate name appears to have existed in Old English (see Boyce), where this feature does not occur. Boje is still in use as a personal name in Friesland.Dutch : nickname from Middle Dutch boy(e) ‘boy’, ‘lad’.
Surname or Lastname
English
English : variant spelling of Bourne.French : nickname for a person with only one eye or with a squint, from Old French borgne ‘squinting’, of unknown origin.In some cases, possibly a shortening of the Dutch surname van den Borne, a habitational name for someone from Born in the province of Limburg (Netherlands) or from a place associated with the watercourse of the Borre river in French Flanders.
BORE AXIS
BORE AXIS
Girl/Female
Muslim
Pure, Clean
Boy/Male
Hindu, Indian, Malayalam
Blessing
Boy/Male
Tamil
Tulashiram | தà¯à®²à®·à¯€à®°à®¾à®®Â
Girl/Female
Arabic, Muslim, Pashtun
Lucky
Girl/Female
Indian, Sanskrit
Kind Hearted; Jesus Heart
Female
Irish
Irish form of English Olive, OILBHE means "olive tree."Â
Boy/Male
Arabic, Muslim
Prosperity
Girl/Female
Arabic, Muslim
Lovely
Boy/Male
Hindu
Cloud
Boy/Male
Tamil
Name of a sage
BORE AXIS
BORE AXIS
BORE AXIS
BORE AXIS
BORE AXIS
a.
In a sore manner; with pain; grievously.
v. i.
To make a hole or perforation with, or as with, a boring instrument; to cut a circular hole by the rotary motion of a tool; as, to bore for water or oil (i. e., to sink a well by boring for water or oil); to bore with a gimlet; to bore into a tree (as insects).
v. t.
To make more; to increase.
v. t.
To put whalebone into; as, to bone stays.
n.
Anything made of bone, as a bobbin for weaving bone lace.
a.
Without clothes or covering; stripped of the usual covering; naked; as, his body is bare; the trees are bare.
v. t.
To make (a passage) by laborious effort, as in boring; as, to bore one's way through a crowd; to force a narrow and difficult passage through.
superl.
Severe; afflictive; distressing; as, a sore disease; sore evil or calamity.
v. i.
To be pierced or penetrated by an instrument that cuts as it turns; as, this timber does not bore well, or is hard to bore.
v. t.
To perforate or penetrate, as a solid body, by turning an auger, gimlet, drill, or other instrument; to make a round hole in or through; to pierce; as, to bore a plank.
v. t.
To take out the core or inward parts of; as, to core an apple.
adv.
With an adjective or adverb (instead of the suffix -er) to form the comparative degree; as, more durable; more active; more sweetly.
v. t.
To fertilize with bone.
a.
To strip off the covering of; to make bare; as, to bare the breast.
imp. & p. p.
of Bore
v. t.
To form or enlarge by means of a boring instrument or apparatus; as, to bore a steam cylinder or a gun barrel; to bore a hole.
n.
One that bores; an instrument for boring.
v. t.
To cut in a traingular form; to piece with a gore; to provide with a gore; as, to gore an apron.