The acronym DDR2(Computer) means : Double Data Rate 2
The abbreviation DDR2 stands for: (Computer) Double Data Rate 2
DDR2 (Computer) means: Double Data Rate 2
Like to add another meaning or definition of the acronym/abbreviation DDR2?
Astrological/horoscope meaning of DDR2. DDR2 means:
The Climate of Tall Buildings
With increasing technology (such as elevators, air conditioning, and electric lightings) and development, the world has come to a decade where everyone wants modernized and attractive buildings (High rise buildings and or towers) to catch the attention of viewers, entrants and passers. Also, with the desire of most governments to expand their cities, most of which have highly occupied land surfaces, it is only possible that such expansions be executed by tall buildings.
In some tropical cities, the climate above the urban buildings is milder and not subject to the same humidity and temperature as it is at street level where solar radiation is absorbed by the ground. These improved comfort conditions may provide opportunities for low energy solutions such as passive cooling and hence providing outdoor living. In some other cities like in Hong Kong where residents’ desires for better views and increased access to daylight and fresh air have been a principle driver for increases in tall buildings.The higher levels of buildings are sought after. In some cities with cold climates such as in Moscow the lower levels of tall buildings can provide better living conditions where the higher levels over-heat due to vertical pressure differences causing mechanically warmed air to rise through stairs and shafts.
Some of the external conditions that vary with height include the surrounding building densities,day lighting levels and reflections from roof tops.
Tall buildings consist of many external and internal conditions that vary incrementally with increased height above the ground
Because architectural and environmental control solutions rarely respond to building height and instead provide uniform facades from the ground to roof level.
This article will tell you more about the climate of tall buildings.
Tall buildings are primarily located in urban and suburban locations and so the influence of the city in rural micro climates is important to the study of the climates of tall buildings.
Tall Buildings in groups cause their own micro-climates which are affected by urban geometry, surface thermal properties and human made waste heat inputs.
Whilst winds are light the boundary layer is mostly influenced by the ground conditions and can lead to significant vertical differences in climate character such as air temperature.
Also, solar radiation is a function of meso-climate which however can vary locally through changes in altitude, surface albedo and pollution levels. The absorption and emission of solar radiation by the ground surface forms the greatest effect on the lower atmosphere in a rural environment. Exposure to solar radiation is influenced by building clustering, density and height leading to shade and reflection from adjacent buildings. The areas of a tall building above the urban canopy layer will typically receive greater solar radiation than below the urban canopy which may be shaded for portions of the year due to greater exposure and reflections from adjacent rooftops. Additional solar radiation is received by vertical surfaces in urban areas from low altitude sun in the morning and evening than would be the case in a natural environment. The ability of building mass to cool at nights through radiation to the sky is reduced by the sky view factor meaning that denser building clusters will experience greater heat retention at nights.
In natural environments the temperature of the air layer near the ground is determined by the surface conditions, the transport of heat upwards and the extent of air mixing regardless of the effects of the surrounding area. This temperature is graded vertically from warmer at the surface to cooler higher in the atmosphere. This vertical gradient is usually known as the temperature lapse rate or the rate of decrease in temperature with height. It is important to note that daily patterns, temperature ranges and peak temperature times vary with the distance above the ground. Peak temperatures are delayed further into the afternoon with increasing height and with seasonal influences where they can be delayed by between 1 and 2 hours in winter. It should be noted that the variation of temperature lapse rate and the shifting of the peak temperature at heights up to 17m are much higher on bright days than cloudy days. Temperature is also affected by wind velocities particularly from the ground to a height of 2m where a lack of mobility of air allows the effects of solar radiation absorption and emission to be maintained.
In natural environments, humidity is influenced by the ground in a similar way to temperature where evaporation from the ground surface is directed upwards as vapor leading to decreasing humidity (or vapor pressure) with height. Measurements show that the humidity gradient decreases with additional height above the ground during the day and is subject to an inversion at night time whereby the humidity increases with height. The levels of humidity at ground level are subject to much higher variations. It is important to note that water vapor pressure decreases with height and being at lowest levels at 2.00pm in the afternoon and highest levels at 8.00am in the morning.
On the other hand, Wind velocity and direction is a result of large-scale differences in air pressure with the flow of air being from areas of higher pressure to areas of lower pressure. Local winds are small-scale winds produced by locally generated pressure gradients. Wind speeds typically increase with additional height and over the course of the day. At lower levels there is a distinct diurnal pattern in mid latitudes where wind speeds peak at midday and reduce at night time. At heights above 100 m the reverse is the case with wind speed peaking during the night and being minimized in the middle of the day.
Also, we have air pressure is the force exerted by the weight of air above and it decreases with additional height above sea level due to there being less air above to exert a force downwards. The vertical reduction in external air pressure causes the air to expand forming the basis for the vertical reduction in air temperature. In urban environment air pressure is further influenced by the effects of wind around building clusters creating positive and negative air pressure zones related to prevailing wind directions and speeds. In the case of tall buildings these differences in external air pressure influence the:
DDR2 abbreviation means:
D: Meaning of D in the acronym DDR2 means: D is a closed letter indicating self sufficiency. It displays self-reliance, a caring attitude and broadmindedness. It's broadmindedness can be seen in the fat that the letter D has a side that looks like an upright pole, it branches from the top and bottom to explore outwards, gain worldly knowledge, but its steady and slow, meticulous and self-reliance brings it back to itself.
R: Meaning of R in the acronym DDR2 means: Letter R sits comfortably on two legs that are a litlle spread apart. It displays great strength. It's close top to itself is uncaring, impetuous, and insensitive.
2: Meaning of 2 in the acronym DDR2 means:
Acronyms, abbreviations and meanings similar to DDR2
DDR2 means: Double Data Rate 2
DDR2 means: Discoidin Domain Receptor 2
DDR2 means: Double Data Rate 2
Popular questions of DDR2 people search before coming here
Q: What does DDR2 stand for? A: DDR2 stands for "Double Data Rate 2".
Q: How to abbreviate "Double Data Rate 2"? A: "Double Data Rate 2" can be abbreviated as DDR2.
Q: What is the meaning of DDR2 acronym? A: The meaning of DDR2 acronym is "Double Data Rate 2".
Q: What is DDR2 abbreviation? A: One of the definitions of DDR2 is "Double Data Rate 2".
Q: What does DDR2 mean? A: DDR2 as abbreviation means "Double Data Rate 2".
Q: What is shorthand of Double Data Rate 2? A: A common acronym of "Double Data Rate 2" is DDR2.
AIS means: Advanced Isotope Separation
FPEIS means: Final Programmatic Environmental Impact Statement
RPE means: Retinal Pigment Epithelium
CPE means: Customer Premises Equipment
N-A-Y-L means: In A While
Search popularirity score of the abbreviation DDR2. The country score of the acronym DDR2. Daily searches of the acronym DDR2? Keyword competition of DDR2 Google search trends of DDR2, Google search history of the acronym DDR2, search graph of DDR2, keyword cost of DDR2
Tags: Meaning of DDR2. The meaning of DDR2. Did you find the acronym meaning/definition of DDR2? Please, add a definition of DDR2 if you did not find what DDR2 stands for.
Copyrights © 2016 AcronymsMeanings. All Rights Reserved.